Sensors for optimal spooling
Flange Detection System - Measurement of the spool and coil geometry - Position Sensor.
Flange Detection and Spool Scanner TDS 3D
The 3D spool scanner is the innovative sensor for the winding technology for measuring the spool and coil geometry and for flange detection during winding in real time. The sensor is suitable for all electronic winders, especially for the ED, MW and SW class winders and machines.
Automatic detection of coil flanges of cylindrical and conical coils for continuous detection of reversal points according to the winding position.
Reliable measurement of coils and winding materials with different shape, color, material or surface.
Distance measurement and detection of flange and reversal points for automatic layer winding of matt to highly reflective coils or winding materials.
Can be used in combination with the Winding Controller MCU for high precision or layer winding.
Article no.: SWTDSV2
Position Scanner MPS
The MPS position scanner detects the position of a wide variety of winding materials, e.g. wire, flat wire, fiber optics, glass fiber or fine wire.
The scanner detects the position of the winding material orthogonal to the winding direction and can thus be used for straight-line unwinding. For certain winding materials, such as solder or demanding winding processes, the position scanner MPS is also used in combination with the spool scanner TDS 3D for layer-optimized spooling.
The position scanner detects finest wires or fiber from a diameter of only 7 µm.
The scanner can be used in combination with the Winding Controller MCU for straight unwinding and layer-optimized winding.